Kia EV6 Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
534 Posts
There's usualy a button on the back of the charger brick to select the charging amperage. Each push of the button cycles through the available values - (10A max)

Hope this helps

John.
yes, but you must hold it down until it flashes, then cycle through and hold it down to save it. It then remembers that setting. Maximum is 10 Amps to circa 2.2Kw which is about right for a 13amp plug as it's a continuous current.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top