[Semeoneor]

Lets see how long this 12v battery lasts 🙃 any estimates?

 

[myosin]

BASS...how low can you go!!!!

 

[camo]

Lets see how long this 12v battery lasts 🙃 any estimates?

Tell us more about this mysterious box and the set up. I know I am curious.

 

[Super Commuter 73]

I as well. Where did you pick up the audio outputs for the lc2i. Right from head unit or back speakers?

 

[JK-KIAEV6]

Think it may have been picked up from the rear wiring that normally goes to the EV6 stock subwoofer then taken into the LC2 I then outputted to Amp then to sub.

https://www.audiocontrol.com/downloads/car/current/lc2i/lc2i-user-manual.pdf

Wonder what the bass output would have been if the amp output had gone back to the stock in car sub.

You would then have some control over the Bass and its Level.

The amplifier looks like a Kicker CX800.1 amp.

2019 CX800.1 Amplifier | KICKER®

KICKER produces high-performance car audio, vehicle specific solutions, marine audio, home and personal audio, and power sports products since 1973.

www.kicker.com

Subwoofer is a DD Audio unit,

LE-512d: 250w to 500w – 12 Inch Loaded Enclosure – DD Audio

ddaudio.com

 

[Semeoneor]

What he said

 

[Super Commuter 73]

Think it may have been picked up from the rear wiring that normally goes to the EV6 stock subwoofer then taken into the LC2 I then outputted to Amp then to sub.

https://www.audiocontrol.com/downloads/car/current/lc2i/lc2i-user-manual.pdf

Wonder what the bass output would have been if the amp output had gone back to the stock in car sub.

You would then have some control over the Bass and its Level.

The amplifier looks like a Kicker CX800.1 amp.

2019 CX800.1 Amplifier | KICKER®

KICKER produces high-performance car audio, vehicle specific solutions, marine audio, home and personal audio, and power sports products since 1973.

www.kicker.com

Subwoofer is a DD Audio unit,

LE-512d: 250w to 500w – 12 Inch Loaded Enclosure – DD Audio

ddaudio.com

Dont think my ordered AWD LR (non GT) spec has a sub. I’ll have to tap from rear speaker output to lc2i then to my Autotek BTS amp. Hopefully this will produce the bass I’ll be looking for.

 

[Semeoneor]

this sunwoofer is great but I'll be looking for a equivalent smaller one to put in stock sub space or allow me to use the trunk

 

[JK-KIAEV6]

this sunwoofer is great but I'll be looking for a equivalent smaller one to put in stock sub space or allow me to use the trunk

Have you tried wiring after the amp back to the stock sub to see what that sounds like incase its just the standard output to the sub is too low from the standard amp?

 

[BDonJ]

I recently installed a custom 8 inch fiberglass woofer taking up the bottom area where the oem stock sub did. It is a Dayton audio HO series 8 inch woofer with a 375w RMS amp (skar audio 1200 something) and makes more than enough bass. That plus some eq touchups I did on the midrange really make the sound quite good (coming from an audio systems engineer background). Anyone interested in details message me. View attachment 4727

Looks great! How much was it to have the custom fiberglass box built?

 

[Steven]

I'm assuming altering the system in any way would void the manufacturer's warranty.

 

[alexw]

I'm assuming altering the system in any way would void the manufacturer's warranty.

No.

 

[SabaEV]

Looks great! How much was it to have the custom fiberglass box built?

Roughly 1000 for the box and install.

 

[BDonJ]

Roughly 1000 for the box and installation.

That is a reasonable price; what state are you in & what shop did you go to? The quotes I have received in Vegas have been ~3000

 

[alexw]

That is a reasonable price; what state are you in & what shop did you go to? The quotes I have received in Vegas have been ~3000

Agreed, seems like a pretty good deal! If I were definitely going to glass a custom box, I'd seriously consider that over DIY. That's not including sub, right?

 

[SabaEV]

Note I provided everything but the wiring kit (amp, preamp and driver). Mascari Enterprises DBA Soundsations is where I got it done (Santa Clarita, 1 hour north of Los Angeles California)

 

[alexw]

Have you tried wiring after the amp back to the stock sub to see what that sounds like incase its just the standard output to the sub is too low from the standard amp?

If you try it and light the stock sub on fire, just make sure you're filming.

 

[JK-KIAEV6]

If you try it and light the stock sub on fire, just make sure you're filming.

Not sure how outputting a speaker output into a speaker input will mean a fire but all ears on how this happens.

 

[Semeoneor]

If you try it and light the stock sub on fire, just make sure you're filming.

I gotta keep my original oem subwoofer for if I trade in for a gt if we ever find out more info on it

 

[mjduke420]

I recently installed a custom 8 inch fiberglass woofer taking up the bottom area where the oem stock sub did. It is a Dayton audio HO series 8 inch woofer with a 375w rms amp (skar audio 1200 something) and makes more than enough bass. That plus some eq touchups I did on the midrange really make the sound quite good (coming from an audio systems engineer background). Anyone interested in details message me. View attachment 4727

Would you be able to share a picture of where they ran the power wire through the firewall? I'm wondering if they used an existing empty grommet or had to drill a new hole.